[an error occurred while processing this directive]


|
Equipment, MAZAK, Japan
 | | Specifications | VCN 410A | VCN 410B | VCN 510C | | X axis stroke (table right/left) | 560 mm | 762 mm | 1050 mm | | Y axis stroke (saddle back/forth) | 410 mm | 510 mm | | Z axis stroke (spindle up/down) | 510 mm | | Distance from table top to spindle nose | 660 mm | | Distance from column surface to spindle center | 434 mm | 576 mm | | Table size | 900 x 410 mm | 1100 x 410 mm | 1300 x 550 mm | | Max. load capacity (evenly distributed) | 500 kg | 700 kg | 1200 kg | | Table surface configuration | 18 mm T-slot x 3 125 mm pitch | 18 mm x 5 100 mm pitch | | | Max. Spindle speed | 12000 rpm 15000 (optional 25000) rpm | | Spindle speed range | Stepless | | Spindle taper | No.40 | | Spindle acceleration to top speed | 2.04 sec. | | Rapid traverse rate | 36 m/min 50 m/min | | Cutting Feed rate (with MAZACC 2D or 3D) | 1 - 8000 (1 - 36000) mm/min 1 - 8000 (1 - 50000) mm/min | | Acceleration / Deceleration of axis | 0.5 G | | Tool shank type | CAT40 | | Tool storage capacity | 30 30 (option 60) | | Max. tool diameter | 80 mm | | with adjacent tool pockets empty | 125 mm | | Max. tool length | 350 mm | | Max. tool weight | 8 kg | | Tool selection method | Random, shortest path | | Tool change time (chip to chip) | 2.9 sec | | Spindle motor | | | (5min./10min./30min./cont. rating) | AC 18.5 / 15 / 11 / 7.5 kW | | (15min./Cont. rating) | AC 30 / 22 kW | | Electrical power supply (30min. / Cont. rating) | 27.8 / 22.8 kVA | 28.3 / 23.3 kVA | 31.29 / 26.3 kVA | | Air supply (pressure / volume) | 0.5 Mpa / 200 NL | | Machine height from floor (standard / Coolant through spindle spec.) | 2778 / 2807 mm | 2783 / 2812 mm | | Required floor space | 2000 x 2600 mm | 2480 x 2600 mm | 2880 x 2835 mm | | Machine weight | 4920 kg | 5100 kg | 6800 kg | | |

Standard Machine Specifications of INTEGREX 300-IIISTEGREX 300-IIIST | | | | Capacity | | | | Max. machining Diameter | Upper turret: | 760 mm [ 30"] | Lower turret: | 420 mm [ 16.5"] | Max. machining length: | 1524 mm [60"] |
| | | | | | | | | |
Travel | X / Z axis (Upper turret): | 630 / 1585 mm [24.8"/62.41"] | Y axis: | 230 mm [9.06"] | X2 / Z2 axis (Lower turret): | 230 / 1530mm [9.06" / 60.24"] | B / C axis : | 225 / 360 degrees |
|
Main Spindle | Chuck size: | 10" | Max main spindle speed: | 4000 rpm | Main spindle motor (30 min. rating): | AC26kW (35HP) |
|
Milling Spindle | Max milling spindle speed: | 12000 rpm | Milling spindle motor (20%ED): | AC18.5kW (25HP) |
|
Second Spindle | Chuck size: | 10" | Max second spindle speed: | 4000 rpm | Second spindle motor (30 min. rating): | AC26kW (35HP) |
| Rapid traverse rate | X / Z axis (Upper turret): | 38000 mm/min [1496IPM] | Y axis: | 26000 mm/min [1024IPM] | X2 / Z2 axis (Lower turret): | 38000 mm/min [1496IPM] | C axis: | 400 rpm |
|
Number of tools | Upper turret: | 20 tools | Lower turret: | 9 tools |
| Tool change time | Upper turret (Tool to tool): | 1.3 sec. | Lower turret (Turret indexing time): | 0.14 sec./ 1 step |
|

Multiplex 6200Y Gantry Robot System Capacity Max. Swing: 320mm Distance between Spindles: 1190mm Bar Work Capacity: 51mm Travel X/Z axis : 230(6200), 240(6200Y) Y axis: 440mm(left), 495mm(right) / 100mm (6200Y) Rapid Traverse Rate 30.5m/min(X), 33m/min(Z), 10m/min(Y), 400 (C) Number of Spindles : 2 Max. Spindle Speed: 5000 (rpm), AC15kW (20HP) / AC22kW(30HP)(option) Rotary Tool Spindle Speed: 4500 (rpm), 6000 (rpm) Rotary Tool Spindle Motor: AC3.7kW No. of Turret: 2 No. of Tools: 12 (Turn + Mill) + 12 (Turn + Mill) tools, 16 + 16 tools (6200Y option) |
To find out more details click here
© 2003 «AMIGO INTERNATIONAL LTD.» Address: Russia, 119331, Moscow, Prospekt Vernadskogo, 29, 8th floor, office 804b. Phone: (499) 131-9900, 133-9042, 133-5441; Fax: (499) 138-1411; Email: amigo@amigogroup.ru
|
[an error occurred while processing this directive]





|