Partners   Contacts Ðóññêèé English
Amigo International Amigo International
[an error occurred while processing this directive] [an error occurred while processing this directive]







  Horizontal Machining Centers, COMPUMACHINE, Japan


Compumill HMC-410

Major Specifications

Service Requirements:

Table Size (Pallet)

16.14”x16.14” (410 mm)

Electrical Input Rower Source:

X Axis Travel

24.01” (610 mm)

220 VAC+10%-15%

60 Hz+/- 1Hz

Total connected power, 25 kVA

Y Axis Travel

20.08 (510 mm)

Z Axis Travel

19.7 (500 mm)

B-Axis Index Table

360 Positions (1) increments

60 Amp service recommended: 80 PSI,

Rapid Traverse Rate

Coolant capacity: 180 liters

     Linear Axes

1200 IPM

Standard Equipment:

     Index Table

20 RPM

Flood coolant system

Cutting Feed rate

Automatic way lube

     Linear Axes

315 IPM

Full integrated bed design

Table Load Capacity

825 lb. (375 kg)

Full Chip and coolant enclosure

Maximum Fixture Size

25.5” dia. X 28.75 high (650 mmx730 mm)

Operator work light

Spindle Speeds

20-8000 RPM

Rotary pallet set-up stations

Spindle Taper

ISO 40

Chip wash by separate pump

Tool Holders

CAT-40 (BT-40 Optional)

Programmable air blast

Pull Studs

MAS-1 (modified CAT version)

Chip air blow through spindle

Automatic Tool-changer Capacity

40 tools

Operator tool stand

Tool Exchange time (Tool to Tool)

1.8 seconds

Pneumatic counter-balance

Tool Selection System

Random bi-directional

Foundation leveling screws & washers

Max. Tool Diameter

3.3” (85 mm)

Operator & maintenance manuals

   (Abjacent pockets empty)

4.9” (125 mm)

Hand tool kit

Max. Tool  Length

11.8” (300 mm)

Machine Options:

Max. Tool Weight

17.6 lb(8 kg)

Coolant trough-the-spindle (200 psi)

Number of Pallets


1.000 psi coolant  trough-the-spindle

Pallet Exchange Time

8 seconds

Rigid tapping

Machine Accuracy

Full fourth axis, 0.001 resolution

Liner      Positioning

+/- 0.0002” over full stroke

60-tool ATC magazine


+/- 0/0001”

120-tool magazine

Indexing Positioning

+/- 3.0 arc-seconds

12,000 rpm spindle


+/- 1.o arc-seconds

Chip conveyor


Hydraulic workpiece clamping

Spindle Drive Fanuc Alpha 18 P

12/15 hp.(9/11kw, cont/30 min.)

Pallet pool

Axis Drives (X,Y,Z)

2.8 hp (Fanuc Alpha 12)

Additional pallets


1.4 hp. (Fanuc Alpha 6)

Hydraulic Pump Motor

2 hp. (1.5 kW)

Coolant Pump Motors(2)

¾ hp. (.55 kW)

Dimensional Data:

Machine Height

104.2” (2.646 mm)

Floor Space

145”x105” (3.680mmx2.670)

Net Weight

19.140 lb (8.700 kg)

The Compumill HMC-410 High Speed Horizontal Machining Center has the following standard features:

  • Designed and built in Japan.
  • Fanuc 18MC control system integrated with Fanuc digital spindle and servo drives.                                                                              
  • Rapid traverse rates of 1200 IPM (X,Y and Z) and 20 RPM (B-Axis rotary table).
  • High-speed contouring, 20-8.000 RPM spindle (12.000 RPM optional)
  • Fast-acting, double-arm, 40 position, automatic tool changer.
  • Automatic pallet changer (8.00 sec.) with two 16” square pallets and separate rotary operator set-up station.
  • Precise, repeatable, one-degree pallet indexing by curvic coupling.
  • Cast-iron construction, heavy-duty anti-friction linear guides and fully supported 40 mm ball-screws…
  • Full enclosure with integral chip guards and an automatic door separating the pallet load station from the work zone.
  • Large work envelope permits fixtures up to 25.5” in diameter and 28.75” high.
  • Simple chip conveyor installation.



CNC FANUC                             Tool box

To find out more details click here


Address: Russia, 119331, Moscow, Prospekt Vernadskogo, 29, 8th floor, office 804b.
Phone: (499) 131-9900, 133-9042, 133-5441; Fax: (499) 138-1411;