[an error occurred while processing this directive]


|
Spinning and flow-forming lathes, DENN, Spain
Lathes with CNC ZENN MODEL |
| ZENN-80 | ZENN-100 | ZENN-160 | ZENN-250 | ZENN-350 | MODEL | Height of points over bed | mm | 400 | 500 | 800 | 1250 | 1750 | Height of points over bed | Maximum distance between centres | mm | 800 | 1200 | 1200 | 1800 | 1800 | Maximum distance between centres | Spindle motor | Kw | 20 | 30’5 | 48 | 63 | 110 | Spindle motor | Hydraulic power pack motor | Kw | 4 | 4 | 22 | 30 | 37 | Hydraulic power pack motor | Spindle speeds | rpm | 200-3000 | 200-3000 | 90-600 | 10-600 | 5-400 | Spindle speeds | Spindle coupling | DIN 55027 | Size 6 | Size 6 | Size 11 | Size 11 | Size 15 | Spindle coupling | Tailstock pressure (maximum) | KN | 15 | 20 | 50 | 75 | 150 | Tailstock pressure (maximum) | Tailstock travel | mm | 350 | 400 | 600 | 600 | 900 | Tailstock travel | Travel of the longitudinal slide | mm. | 450 | 600 | 750 | 1100 | 1600 | Travel of the longitudinal slide | Stress of the long. movement (max) | KN | 18 | 40 | 60 | 120 | 200 | Stress of the long. movement (max) | Travel of the transversal slide | mm. | 300 | 400 | 500 | 500 | 800 | Travel of the transversal slide | Stress of the transv.movement (max) | KN. | 18 | 40 | 60 | 120 | 200 | Stress of the transv.movement (max) | Max. Longitudinal feed speed | m/min | 15 | 15 | 5 | 5 | 5 | Max. Longitudinal feed speed | Max. Transversal feed speed | m/min | 15 | 15 | 5 | 5 | 5 | Max. Transversal feed speed | Approx. Weight | kgs. | 3000 | 7000 | 15000 | 20000 | 34000 | Approx. Weight | Approx. thickness in Al | mm | 3 | 6 | 10 | 14 | 20 | Approx. thickness in Al | Approx. thickness in St | mm | 2 | 4 | 8 | 10 | 15 | Approx. thickness in St | Approx. thickness in Ss | mm | 1,2 | 2,5 | 6 | 8 | 10 | Approx. thickness in Ss | Carriages movement | | Electric motor | Electric motor | Electric motor | Hydraulic | Hydraulic | Carriages movement |

FLOW FORMING LATHES MODEL |
| RL-400 | RL-400/2 RL-400CNC | RL-500 RL-500CNC | RL-600 RL-600CNC | RL-70/130CNC | RL-70/250CNC | RLE-400 RLE-400CNC | RLE-500 RLE-500CNC | RLE-600 RLE-600CNC | RLE-700CNC | Height of centres | mm | 400 | 490 | 600 | 600 | 700 | 700 | 400 | 600 | 600 | 600 | Distance between centres (maximun) | mm. | 1100 | 1200 | 1200 | 2000 | 1500 | 1500 | 1100 | 1200 | 1500 | 1500 | Speed of the main spindle | rpm | 60-600 | 10-800 | 10-800 | 10-600 | 100-600 | 100-600 | 60-600 | 10-800 | 10-600 | 50-400 | Dimensions of the main spindle | DIN 55027 | Tam. 8 | Tam. 8 | Tam. 11 | Tam. 11 | Tam. 15 | Tam. 15 | Tam. 8 | Tam. 11 | Tam. 11 | Tam.15 | Power of the main motor | Kw | 22 | 22 | 48 | 63 | 130 | 250 | 22 | 48 | 63 | 130 | Stress of the tailstock | KN | 50 | 50 | 75 | 75 | 150 | 250 | 50 | 75 | 75 | 150 | Travel of the tailstock | mm. | 700 | 1000 | 1000 | 1000 | 700 | 700 | 700 | 600 | 1000 | 1200 | Longitudinal travel | mm | 700 | 1000 | 1100 | 1000 | 750 | 750 | 500 | 900 | 750 | 900 | Stress of the longitudinal travel | KN | 100 | 120 | 150 | 250 | 500 | 700 | 100 | 150 | 250 | 500 | Transversal travel | mm | 200 | 200 | 250 | 250 | 250 | 250 | 200 | 250 | 300 | 200 | Transversal stress | KN | 100 | 100 | 120 | 150 | 3 x 400 | 3 x 500 | 2 x 100 | 2 x 120 | 2 x 150 | 2 x 400 | Ejector travel | mm. | 600 | 1000 | 1000 | 1000 | 250 | 250 | 600 | 600 | 700 | 500 | Ejector stress | KN | 50 | 50 | 75 | 75 | 150 | 200 | 50 | 75 | 75 | 140 | Power of the motor of hyd. Unit | Kw | 11 | 7.5 | 15 | 15 | 90 | 125 | 7,5 | 10 | 30 | 44 |
To find out more details click here
© 2003 «AMIGO INTERNATIONAL LTD.» Address: Russia, 119331, Moscow, Prospekt Vernadskogo, 29, 8th floor, office 804b. Phone: (499) 131-9900, 133-9042, 133-5441; Fax: (499) 138-1411; Email: amigo@amigogroup.ru
|
[an error occurred while processing this directive]





|