[an error occurred while processing this directive]


|
Universal Grinders, Jones & Shipman, England

Microprocessor controlled universal cylindrical grinder
1300X Specification Wheelhead | Total infeed | 245 mm | Maximum programmable diametral infeed rate, per min. | 100 mm | Minimum programmable increment | 0.001 mm | HPG increments | 0.001, 0.01 or 0.1 mm | Swivel range | 190 grad cw to 45 grad ccw | External Grinding Wheels | Left hand standard | 350x50x127 mm | Right hand standard | 300x25x127 mm | Maximum diameter ground | | Using 350 mm wheel | 300 mm | Using 300 mm wheel | 350 mm | Spindle speeds | 1775, 2068, 2400 rpm | Motor power | 5.5 hp (4kw) | Internal Grinding Wheels | Diameter range (standard spindle) | 19-38 mm | Spindle speeds |
| Standard | 16500 rpm | Optional | 24000, 105000 rpm | Motor power | 3 hp, (2,2 kw) | Table | Maximum traverse speed, per min. | 5000 mm | Minimum programmable increment | 0.001 mm | HPG increments | 0.001, 0.01 or 0.1 mm | Maximum length between centers | | 1300 X - 700 | 700 mm | 1300 X - 1000 | 1000 mm | Table Swivel Angle | | 700 mm centers | 16 grad cw to 18 grad ccw | 1000 mm centers | 10 grad cw to 16 grad ccw | Workhead | Center height | | Standard | 127 mm | Optional | 178 mm | Maximum workpiece weight between centers | 100 kg | Motor power | 1,5 hp, (1,1 kw) | Speed range, continuously variable | 1 to 660 rpm | Swivel Angle | 15 grad cw to 90 grad ccw | Centers, Standard/ reduced | 5 MT / 3 MT | Machine weight | 1300 X - 700 | 2400 kg | 1300 X - 1000 | 2700 kg |
Standard Left hand wheelguard Right hand wheelguard Grinding Wheels, one left one right Wheelbalancing mandrel Digital indicator for table swivel Table mounted diamond dresser No. 3 MT carbide tipped full center No. 3 MT carbide tipped half center Workhead reducing sleeve 5/3 Morse taper Workhead alignment bar 125 mm 3 jaw self centering chuck, backplate and guard Internal grinding spindle 19-38 mm, airmist lubricated | Auto Internal wheelguard Table and bed splash guards Coolant tank Set of driving carriers Standard hand tools and user manual Standard machine color is Nimbus Grey and Blue as illustrated on front cover Each machine is suitable, subject to standard mains tolerance of 6% for 3 phase operation in one of the following supply groups:208/220/230 V 50/60 Hz, 380/440 V 50 Hz or 460/480/575 V 60 Hz. Control voltage 110 V AC/ 24 V DC Additional Equipment A comprehensive range of additional Equipment is available to suit individual requirements. |

Microprocessor controlled surface grinders Specifications: model | 634 X | General capacities | Max grinding L x W (mm) | 760x300 | Max Wheelhead movement (mm) | 400 | Max table load (including chuck, if used) (kg) | 250 | Standard magnetic chuck size (mm) | 600x300 | Wheelhead | Distance between wheel & table (new wheel) (mm) | 360 | Size of grinding wheel: Standard | 355x32x127 | Speed of grinding wheel: - 50 Hz – motor (rpm) | 1420 | Speed of grinding wheel: - 60 Hz – motor (rpm) | 1705 | Wheelhead motor (kW) | 3.7 | Table | Working surface (mm) | 600x300 | Longitudinal traverse, max hand / hydraulic (mm) | 760 | Traverse speed range (per minute) | 3-25 | Traverse per revolution of handwheel (mm) | 85 | Width of tenon slot (mm) | 14.4 | Distance from floor to table (mm) | 950 | Crossfeed | Total cross traverse (mm) | 300 | Feed per graduation of electronic handwheel (mm) | 0.001, 0.01, 0.05 | Intermittent feed increment (per stroke) (mm) | 0.5 - 20 | Continuous feed range (per second) (mm) | 0 - 15 | Min. digital display (mm) | 0.001 | Number of display decades | 7 | Sparkout under wheel | 0 - 10 | Wheelfeed | Feed per graduation of electronic handwheel (mm) | 0.001, 0.01, 0.05 | Powered wheelhead rise &fall jog speed (per minute) (mm) | 750 | Automatic two rate downfeed – coarse feed increment (mm) | 0.002 – 0.045 | Automatic two rate downfeed – fine feed increment (mm) | 0.000 – 0.01 | Min. digital display (mm) | 0.001 | Number of display decades | 7 | Dimensions | Machine height (mm) | 2590 | Machine weight, net, (approx) (kg) | 2600 | Machine weight, gross, (approx) (kg) | 2950 | Shipping dimensions (approx) (m3) | 10.42 |
Product development 540 H 524 E new control 524 Easy 524 CNC Techmaster 634X Techmaster 634 Easy 1300X/700 1300X/1000 Ultramat Easy 650 Ultramat Easy 1000 Ultramat CNC 650 Ultramat CNC 1000 To find out more details click here.
© 2003 «AMIGO INTERNATIONAL LTD.» Address: Russia, 119331, Moscow, Prospekt Vernadskogo, 29, 8th floor, office 804b. Phone: (499) 131-9900, 133-9042, 133-5441; Fax: (499) 138-1411; Email: amigo@amigogroup.ru
|
[an error occurred while processing this directive]





|